| Item # |
Item Name |
List Price |
| 0554 0640 | Sintered cap 21mm diameter | $56.00 |
| 0554 0647 | Stainless sintered cap Ø 12 mm for high flow velocity or in contaminated air. G1, M01 | $52.00 |
| 0554 0660 | Salt solutions for checking RH probe perfromance, 11.3% and 75.3% RH, w/ adapter for humidity probe | $337.00 |
| 0554 0666 | Teflon sintered filter (21mm) diam. | $69.00 |
| 0554 0755 | Sensor metal protective cap (slotted), Ø 12 mm, flow velocities of < 7 m/s, especially suited to cleanrooms, not suitable for dusty or high humidity environments G4, M04 | $70.00 |
| 0554 0756 | Teflon sintered filter, Ø 12 mm, corrosive substances, high RH, high velocity. G3, M03 | $62.00 |
| 0554 0757 | Cap with wire mesh filter, Ø 12 mm, for protection against coarse particles. G2, M02 | $90.00 |
| 0554 0758 | PTFE (Teflon) sintered filter, Ø 12 mm, not affected by condensation, water-repellent, resistant to corrosive substances. Applications: compressed air measurements, high humidity range (continuous measurement), high flow velocities | $76.00 |
| 0554 1031 | PTFE (Teflon) cap, Ø 5 mm, attachable. Applications: dust protection, high humidity level measurements, high flow velocities | $77.00 |
| 0554 2140 | Cap for bore holes for Ø 12 mm humidity probe, used to measure equilibrium moisture in bore holes, set package - 50 units | $61.00 |
| 0610 9714 | High accuracy air probe for air and gas temperature measurements with bare, mechanically protected sensor, tip Ø 9 mm, probe 150 mm, -40 to 266°F / -40 to +130°C, fixed cable | $279.00 |
| 0614 0240 | Smart high accuracy stainless steel temp probe +/-0.05% w/ EEPROM (2), tip Ø 4 mm x 295 mm, -40 to 572°F / -40 to +300°C, requires connection cable 0430 0143 or 0430 0145 (2) | $719.00 |
| 0628 0012 | Surface adapter for Ø 12mm humidity probe (2) | $65.00 |
| 0628 0013 | Flexible RH probe 4.9 ft / 1.5 m length, probe tip 50x19x7mm, 0-100% RH, -4 to 257°F (2) | $1,189.00 |
| 0628 0022 | Flexible humidity probe (does not retain shape), tip Ø 12 mm x 100 mm, probe 1.5 m, - 4 to 356°F / -20 to +180°C (2) | $1,469.00 |
| 0628 0024 | Water activity (aW) probe assembly with measurement container, 0 to +1 aW, 0 to +100 %RH, -4 to 158°F / -20 to +70°C, 9.6 ft / 2.94 m cable | $1,659.00 |
| 0636 0340 | Sword probe for measuring humidity and temperature in stacked material, tip 18 mm x 5 mm, probe length 300 mm, 0 to +100 %RH, -4 to 158°F / -20 to +70°C (2) | $989.00 |
| 0636 0565 | Building material moisture cable, Display values 100 to 66 wet; 0 to 1 very dry, 0 to 100 k Ohm = 100 to 0 % | $250.00 |
| 0636 2130 | Thin humidity probe incl. 4 attachable protection caps for ambient air measurements, measurements in exhaust air ducts and equilibrium moisture measurements, probe Ø 4 mm x 250 mm, 0 to +100 %RH, -4 to 158°F / -20 to +70°C (2) | $775.00 |
| 0636 2140 | Humidity / temperature immersion / penetration probe for equilibrium moisture or for measurements in exhaust ducts to +120°C, probe Ø 12 mm x 300mm, 0 to +100 %RH, -4 to 248°F / -20 to +120°C (2) | $865.00 |
| 0636 2142 | High humidity level probe w/ heated sensor element, no humidity on sensor, probe Ø 12 mm x 300 mm, 0 to +100 %RH, -4 to 185°F / -20 to +85°C (2) | $1,199.00 |
| 0636 9715 | Duct humidity / temperature probe attachable to telescopic handle 0430 9715, probe Ø 12 mm x 180 mm, 0 to +100 %RH, -4 to 158°F / -20 to +70°C, 9.8 ft / 3 m cable | $589.00 |
| 0636 9740 | Standard ambient air probe | $509.00 |
| 0636 9741 | High accuracy ambient air probe up to +70°C, RH (1%) acc., probe Ø 21 mm, 0 to +100 %RH, -4 to 158°F / -20 to +70°C (2) | $789.00 |
| 0636 9742 | Humidity/temperature probe ± 2%RH, probe Ø 21 mm, 0 to +100 %RH, -4 to 158°F / - 20 to +70°C (2) | $569.00 |
| 0636 9840 | Standard compressed air pressure dew point HPD probe, 300 mm length, 0 to +100 %RH, -22 to 122°F / -30 to +50 °C tpd (2) | $1,919.00 |
| 0636 9841 | Precise compressed air pressure dew point HPD probe, 300 mm length, 0 to +100 %RH, -76 to 122°F / -60 to +50 °C tpd (2) | $2,309.00 |
