RAEGuard FMC-10 Single Point Gas Alarm Unit

RAEGuard FMC-10 Single Point Gas Alarm Unit

The FMC-10 has been designed to operate in the full range of environments from commercial premises through to heavy industrial applications which may require hazardous area sensing.

A fixed single point alarm unit that meets the requirements for economic and reliable monitoring of gas levels in a wide range of environments from commercial premises through to heavy industrial applications which may require hazardous area sensing. Typical monitor locations are - public buildings, boiler plant rooms, swimming pools, water treatment works, H&V control systems, manufacturing and process plants.

Key Features:

• Flammable, Oxygen or Toxic Gases
• Wall or panel mount
• Two alarm stages + relays
• Internal or remote sensor
• Compact size
• Low power consumption
• 4-20mA analogue output
• Sealed to IP65 rating
• Extensive fault detection circuitry
• Delay to alarm options

Applications:

• Petrochemical industry
• Chemical industry
• Storage facilities
• Process plants
• LNP facilities
• Waste water treatment

Specifications:

Measuring Range:

• Combustible Gas - LEL, % Vol, ppm
• Toxic Gas - ppm, % Vol
• Oxygen - % vol - Depletion or Enrichment
• Any 4~20mA input signal

Indicators:

• Digital Display 31/2 Digit
• Power - Green L.E.D.
• Switch on delay power indicator flashing - 45 seconds
• Alarms Lo/Hi - Red L.E.Ds
• Fault - Amber L.E.D.
• System Test - Alarm L.E.D.s flashing
• Alarm relay inhibit - Fault L.E.D. on

Audible Alarm:

• Low, High and Fault Alarms

Power Supply:

• 230/115v AC 50/60 Hz or 24vDC
• The two voltages may be utilized simultaneously - stand

Power Consumption:

• 4 watts - full alarm

Outputs:

• Low, High and fault alarm relays -SPCO normally de-energized - energized option
• Lo gas alarm relay SPCO normally energized - de-energized option
• latched or unlatched
• Fault relay SPCO normally de-energized - energized option
• All contacts rated 5A - 230v AC
• 4-20mA/1-5v
• Output 24vDC @ 100mA max - auxiliary equipment (non inductive)

Alarm Settings:

• Digital setting (fully adjustable between zero and full scale)
• Delay to alarm options - 10/30 seconds, 10 minutes

Sensor Inputs:

• Bridge type 3 wire detector mv (Catalytic)
• 4-20mA (electrochemical / infrared)

Sensor Cable:

• 3 core 1.5mm2 screened 1.5km

Miscellaneous:

• Operating temperature -10 to +50°C
• Storage temperature -10 to 65°C
• Alarm relay inhibit during calibration
• Sounder Inhibit
• System function test switch
• Dimensions L 200mm H 120mm D 58mm
• Weight 0.8 kg
• Protection IP65
• Field Terminals - screw type 2.5mm
• Cable entry - top, bottom, sides, rear

*Specifications are subject to change

Item #	Item Name	List Price
F05-0011-000	Controller for 4-20mA transmitters (230 Volt)	QUOTE
F05-0011-001	Controller for 4-20mA transmitters (115 volt)	QUOTE